5 Easy Ways to Boost Your Wood Heater Effectiveness

5 Easy Ways to Boost Your Wood Heater Effectiveness

If you live in an area with cold winters and you’re sick of paying high heating bills, then Wood Heaters Melbourne might just be the solution to your problem. But while these appliances are great at heating up a room and increasing your home’s ambience, they don’t always do what they’re supposed to: heat your house! If this sounds like something that has happened to you before (and it probably has), then follow along as we show you how easy it is to achieve optimal performance out of your stove or fireplace by following some simple tips.

Don’t Overfill Your Wood Heater

When you’re using your Wood Heaters Melbourne, it’s important not to overfill the unit. Overfilling can cause the fire to burn too quickly, which reduces efficiency and wastes fuel. It can also cause the chimney to smoke and even make the fire go out of control in some cases.

For best results, fill your wood heater until there is one inch between its top (or lid) and its sides—no more than that!

Use Your Fireplace Properly

Your fireplace is a great way to get your wood-burning stove up and running. However, it can be tricky to figure out how exactly you should go about using the fireplace.

The first step is to make sure that you have a screen in place behind the glass pane of your fireplace. This ensures that no sparks fly out and damage nearby furniture or walls. Also, make sure that there are no pets or kids playing nearby!

Next, light kindling over newspaper or another fire starter material, if possible, so that when it catches on fire, it will ignite other pieces of wood in your pile faster than just lighting them with a matchstick would do alone.

Wood Heater

Get Install an Efficient Heat Transfer System

A heat transfer system is an essential part of any wood-burning heater. It takes the heat from the firebox and transfers it directly into your home, which allows you to save on energy costs, as well as makes heating your home more effective. Heat transfer systems are typically made of metal and can be installed in the firebox or on top of it.

There should be at least 6 inches between where your heat transfer system is placed and where you will keep your firebox (for example, if a heat transfer system is placed directly on top of a small wood stove, there should still be at least 6 inches between these two pieces so that they do not touch).

Burn Seasoned Wood

When you’re starting your fire, it’s best to use seasoned wood. Seasoned wood is less likely to spark, spit, smoke or cause creosote buildup in your chimney because it has been dried for months or years. You can find seasoned logs and sticks at hardware stores, but if you have a large supply of green wood left over from cutting down trees last winter (as most people do), then you may want to consider drying the logs before storing them until next winter.

Start with a Clean Wood Stove

The first step to a more efficient wood stove is to start with a clean one. Sure, it’s great to have a nice new stove and all the bells and whistles, but if you don’t maintain it well, none of that will matter.

  • Remove ash from the stove regularly so it doesn’t block airflow or get in the way of burning efficiently.
  • Clean the flue regularly, so smoke doesn’t have an opportunity to build up inside it
  • Clean out your chimney annually (or as needed) so debris doesn’t build up at its base or cause leaks that could cause damage or malfunctioning of your system.
  • Use a soft brush or vacuum cleaner attachment to clean out any dust inside your wood heater’s interior and glass doors as needed. Be careful not to scratch any surfaces if using something like steel wool!
  • Make sure you’re cleaning all around where any exhaust systems meet with other parts such as metal pipes, fans, etc., especially after installation when they may be covered in protective coating instead of paint/stain etc. You don’t want anything blocking their ability for airflow!


After reading this article, you should be feeling more confident about your Wood Heaters Melbourne. You should know more about how to make it work efficiently so that you’ll need to spend less time keeping it going and more time enjoying its warmth. If you have any questions or comments, please leave them below!